Technical Specifications Profile

Zinc coated galvanized structural steels

DIN EN 10147-2000

ERDEMİR QUALİTY NO. STANDARD PROVISION PHYSICAL SPECIFICATIONS COATING THICKNESS ( gr/m2 )
Re N/mm2 (kg/mm2) Rm N/mm2 (kg/mm2) A80 (%) Creasing
NEW BEFORE kmç d:Thickness
Standards Quality DIN EN 10147-91 min. min. min.
1322 DIN EN 10147 S220GD+Z Fe E 220 G Z 220 (22.4) 300 (30.6) 20 1 d 100-140
1325 DIN EN 10147 S250GD+Z Fe E 250 G Z 250 (25.5) 330 (33.6) 19 1 d 100-140
1328 DIN EN 10147 S280GD+Z Fe E 280 G Z 280 (28.6) 360 (36.7) 18 2 d 140-225
1332 DIN EN 10147 S320GD+Z Fe E 320 G Z 320 (32.6) 390 (39.8) 17 3 d 225-275
1335 DIN EN 10147 S350GD+Z Fe E 350 G Z 350 (35.7) 420 (42.8) 16 3 d 225-275

Standards

  • AISI (American Iron and Steel Institute)
  • TS 498 (load value to be taken in dimensioning of structural elements)
  • TS 648 (Calculation and construction rules of steel structures)
  • TS 11372 (Calculus Rules of Cold-formed Profiled Steel Structures)
  • TEC (Earthquake Regulation)

ITU (Istanbul Technical University) Report

ITU is the expert engineering university in Turkey which uses the materials and does the calculation and ITU has received the report as shown below after approximately 1 year of researching.

This report is the first and only study on mild steel structures in Turkey.

The steel, screws, anchors and studs that used during the work were also checkeditu-raporu

Please click here to see the reports.